If you are budgeting a prison, data center, industrial plant, power station, military site, or other protected facility, you may start with one question:
How much does 358 Fence cost per meter?
There is no useful single price until the fence configuration is clear. A quotation for 358 mesh panels alone can look very different from a quotation that includes posts, security fittings, gates, coating, and export packing.
Therefore, project buyers should first define what one meter of the finished security fence actually contains.
This guide explains how BDFENCE approaches 358 Fence pricing and what buyers should check before comparing quotations.
First Question: Are You Pricing a Panel or a Fence System?
This distinction matters more than many buyers expect.
A 358 Fence project can include:
- 358 welded mesh panels
- Steel posts
- Security clamps or fixing bars
- Anti-tamper bolts and nuts
- Post caps
- Pedestrian gates
- Vehicle gates
- Fence fittings
- Optional security toppings
As a result, two suppliers can both quote “358 Fence per meter” while offering a very different scope.
Before comparing numbers, ask each supplier exactly what the price includes.
What Builds the Cost of One Meter of 358 Fence?
| Cost Area | What Buyers Should Check |
|---|---|
| Panel | Height, width, wire diameter and mesh specification |
| Post | Section size, wall thickness, length and spacing |
| Finish | Galvanizing, powder coating and required color |
| Connections | Clamps, fixing bars, bolts and other security fittings |
| Access | Pedestrian and vehicle gates |
| Security Add-ons | Project-specific top extensions or additional protection |
| Logistics | Export packing, loading method and shipping terms |
Panel Weight Is Where the Calculation Starts
For most 358 Fence quotations, the welded panel represents a major share of the material cost.
A typical 358 mesh uses an opening of approximately 76.2 × 12.7 mm. However, projects can use different wire diameters, panel heights, and panel widths.
For example, changing from a lighter wire specification to a heavier one increases the amount of steel in every panel.
That difference becomes much larger when a project needs hundreds or thousands of panels.
Therefore, buyers should never compare two 358 Fence prices without checking the actual wire specification.
A Taller Fence Changes More Than Panel Area
Suppose a project changes from a lower perimeter fence to a significantly taller security barrier.
Naturally, the panel requires more material. However, the project may also need:
- Longer posts
- Stronger post sections
- Different foundations
- Larger gates
- Additional fixing points
For this reason, increasing fence height does not simply increase the mesh price. It can change the design of the whole system.
The Post Specification Can Move the Quote Quickly
Posts are easy to overlook because buyers often focus first on the 358 mesh.
However, a long security perimeter may require hundreds of steel posts.
Post cost changes with:
- Post section size
- Steel wall thickness
- Total post length
- Post spacing
- Base plate or embedded installation
- Surface finish
For example, reducing wall thickness can lower a quotation. Yet the lower number may no longer represent the post specification required by the project.
Therefore, always compare post data together with panel data.
Do Security Fittings Matter to the Price?
Yes, especially on long projects.
358 Fence needs a secure connection between each panel and post. Depending on the design, the system may use:
- Metal clamps
- Full-length fixing bars
- Security plates
- Anti-tamper bolts
- Special nuts
- Post caps
One fitting may have a small unit value. However, a 3,000-meter or 5,000-meter project can require a large number of them.
More importantly, the fittings form part of the security system. Buyers should confirm both their quantity and design instead of treating them as an afterthought.
How Does Surface Treatment Affect 358 Fence Price?
The installation environment determines the level of corrosion protection the project needs.
Common configurations may include galvanized steel or galvanized steel with a powder-coated finish.
Powder coating can also provide the required project color, such as green, black, or another specified RAL finish.
However, buyers should not compare coatings only by color. Instead, confirm the required treatment for the panel, post, gate, and fittings.
A fence system works outdoors as a complete assembly, so corrosion protection should not stop at the mesh panel.
Gates Can Change the Real Cost Per Meter
Consider two projects with the same 2,000-meter perimeter.
Project A has two pedestrian gates and one vehicle gate. Project B has twelve pedestrian gates and eight large vehicle gates.
Their average cost per meter will not be the same.
A security gate adds more than an opening. It may require:
- Gate frames
- 358 mesh infill
- Heavy gate posts
- Hinges
- Locks
- Stops
- Other gate hardware
Therefore, send the gate schedule before asking for a final project price.
What About Anti-Climb Security Extensions?
Some high-security projects require additional protection above the standard fence line.
If the project specification includes a top security extension, the supplier needs to consider its supports, connections, material quantity, and packing requirements.
As a result, the final price will differ from a standard 358 Fence system without an upper extension.
For tender work, make sure all suppliers quote the same top configuration.
Why Order Quantity Changes the Factory Calculation
A 100-meter order and a 5,000-meter order do not create the same production conditions.
Larger orders can allow the factory to organize welding, post production, coating, packing, and container loading in longer production runs.
Meanwhile, small customized orders may carry a higher cost per meter because setup and handling costs are spread across fewer units.
This does not mean every large order receives the same discount. The actual result still depends on the specification and production requirements.
EXW, FOB and Landed Cost Are Different Numbers
Another common pricing mistake is comparing quotations based on different trade terms.
A factory price in China is not the same as the final cost delivered to your project site.
| Price Stage | Typical Cost Scope |
|---|---|
| Factory Level | Manufactured fence system |
| Export Level | Fence + packing + export-related logistics according to the agreed term |
| International Freight | Container or other transport to destination |
| Destination | Local charges, duties and inland delivery where applicable |
Therefore, buyers should compare quotations under the same Incoterm whenever possible.
Why We Do Not Publish One Fixed 358 Fence Price
A fixed online number may attract attention, but it can also create the wrong budget expectation.
For example, imagine that one buyer needs a standard industrial perimeter while another needs a taller fence with heavier posts, multiple security gates, and additional top protection.
Calling both products “358 Fence” does not make their costs equal.
For B2B project procurement, a specification-based quotation is more useful than a generic price that may not match the tender.
How to Spot a Quote That Looks Too Cheap
A low quotation does not automatically mean poor quality. However, a large price gap deserves a closer look.
Check whether the cheaper offer changed any of these items:
- Wire diameter
- Panel dimensions
- Post wall thickness
- Post spacing
- Surface treatment
- Number of security fittings
- Gate specification
- Security extension
- Packing scope
In other words, compare the kilograms, dimensions, and supplied components behind the price—not only the price itself.
A Smarter Way to Compare 358 Fence Suppliers
Before sending an RFQ, create one technical sheet and ask every supplier to quote against it.
Then compare the offers in the following order:
- Panel specification
- Post specification
- Fence fittings
- Surface treatment
- Gate scope
- Security options
- Packing
- Trade term
- Final price
This method takes a little more time at the beginning. However, it makes the commercial comparison much clearer later.
What Should You Send BDFENCE for an Accurate Price?
You do not need a perfect technical drawing before contacting us.
If available, send:
- Total perimeter length
- Required fence height
- Wire diameter
- Panel dimensions
- Post size and wall thickness
- Surface finish or RAL color
- Pedestrian gate quantities and sizes
- Vehicle gate quantities and sizes
- Required fence fittings
- Security topping requirements
- Project drawing or BOQ
- Destination port or country
If some details are still open, BDFENCE can review the available project information before preparing the quotation.
Buying 358 Fence Directly from BDFENCE
Hebei Bendin Industrial Technology Co., Ltd. manufactures 358 Security Fence systems for international project buyers, contractors, distributors, and security applications.
Instead of supplying only welded panels, BDFENCE can prepare a coordinated package with:
- 358 Fence panels
- Steel posts
- Security fence fittings
- Anti-tamper fasteners
- Pedestrian gates
- Vehicle gates
- Project-specific accessories
In addition, our team can review BOQ documents, drawings, gate schedules, and packing requirements before production.
Final Answer: How Much Does 358 Fence Cost Per Meter?
The correct answer depends on what that meter contains.
Panel height, wire diameter, post strength, coating, security fittings, gates, order quantity, and shipping scope can all change the final figure.
Therefore, use online price references only for early budgeting. For procurement, ask for a quotation based on the actual project specification.
That approach gives you a much better basis for comparing suppliers and controlling the final fence budget.
Request a 358 Fence Quotation
Have a drawing, BOQ, fence schedule, or even a basic project requirement?
Send it to BDFENCE. We can review the fence configuration and prepare a quotation according to your actual project scope.
Hebei Bendin Industrial Technology Co., Ltd. (BDFENCE)
Phone:
+86 18703182863
WhatsApp:
+86 18703287372
Email:
info@bd-fence.com
Website:
https://bd-fence.com/
FAQ
What determines 358 Fence price per meter?
The main variables include panel height, wire diameter, post specification, surface finish, security fittings, gates, project quantity, and supply scope. Therefore, an accurate price needs a defined fence configuration.
Is a taller 358 Fence always more expensive?
Generally, a taller system uses more steel. In addition, it may need longer or stronger posts and larger gates. As a result, the total system cost can rise by more than the panel area alone suggests.
Are posts included in the 358 Fence price?
That depends on the quotation. Some offers cover panels only, while others include posts and fittings. Therefore, buyers should confirm the supply scope before comparing prices.
Do security fence fittings affect the total price?
Yes. Clamps, fixing bars, security bolts, nuts, caps, and other fittings add to the system cost. On long projects, the required quantity can become significant.
Can BDFENCE quote a complete 358 Fence system?
Yes. BDFENCE can quote panels, posts, security fittings, pedestrian gates, vehicle gates, and related accessories according to the project requirements.
Can I send BDFENCE a BOQ for pricing?
Yes. You can send a BOQ, drawing, technical specification, or gate schedule. Our team can review the available information and prepare the quotation around the confirmed project scope.