• wechat
  • wechat
x
Send Your Inquiry Today
Quick Quote
358 Mesh Fencing: Specifications and RFQ Requirements for South African Projects

358 Mesh Fencing: Specifications and RFQ Requirements for South African Projects

For South African security contractors and fencing distributors, choosing the right 358 Fence starts with the project specification. Panel height, wire diameter and post arrangements all need to match the intended installation. A product described simply as a high-security fence does not provide enough information for a proper purchasing decision.

When sourcing 358 Mesh Fencing from China, buyers should pay attention to the actual mesh dimensions and manufacturing requirements. These details affect the panel configuration, supporting structure and final supply cost.

01. What Does 358 Mesh Mean?

The name 358 comes from its traditional imperial measurements:

  • 3 inches: approximately 76.2 mm
  • 0.5 inches: approximately 12.7 mm
  • 8 gauge: commonly specified as approximately 4 mm wire

This creates a narrow rectangular mesh opening.

The design makes it difficult to obtain conventional hand and foot holds. It also restricts access for many common cutting tools.

For projects requiring anti-climb perimeter protection, this mesh configuration is an important starting point.

02. 358 Mesh Fencing Specifications

Before requesting prices, buyers should establish the main product dimensions.

SpecificationCommon Configuration
Mesh opening76.2 × 12.7 mm
Wire diameterApproximately 4 mm
Panel height2,000–3,600 mm options
Panel widthAccording to project requirements
ConstructionWelded steel mesh
Surface treatmentGalvanized or powder coated
Supporting structureCompatible steel security posts

These are common configurations, not mandatory dimensions for every project.

For South African infrastructure and industrial applications, the final specifications should follow the approved technical drawings.

Buyers should also confirm whether the stated wire diameter refers to the uncoated steel wire or the finished coated product.

03. Panels and Posts Must Be Specified Together

A 358 mesh panel cannot be evaluated separately from its supporting structure.

The manufacturer needs to understand how the panels connect to the posts and how the complete fence will be installed.

Include the following components in the material schedule:

ComponentRequired Information
Mesh panelsHeight, width and wire diameter
Line postsDimensions and wall thickness
Corner postsPositions and specifications
Terminal postsFence ends and connection points
Fixing clampsCompatible connection system
FastenersMaterial and finish
Post capsMatching post dimensions

If the project includes vehicle or pedestrian gates, list them separately.

Their supporting posts, hinges, locks and opening dimensions may differ from those of ordinary fence sections.

04. Galvanized or Powder-Coated 358 Fence?

South African projects can have very different environmental conditions.

An inland industrial facility may have different corrosion exposure from a site near the coast.

Two common finishing options are:

Hot-Dip Galvanized

A zinc coating protects the steel against corrosion. Buyers should confirm the required coating specification and inspection criteria.

Powder Coated

Powder coating provides a finished colour and an additional surface layer. Green is a common choice for outdoor security fencing.

For projects requiring both finishes, galvanized steel with an additional powder-coated finish can be considered.

The specification should cover panels, posts and accessories rather than the mesh alone.

05. What Should South African Buyers Include in an RFQ?

A clear RFQ helps manufacturers understand the actual project requirements.

Before contacting a supplier, prepare the following information:

  1. Required panel height and width.
  2. Mesh opening and wire diameter.
  3. Surface treatment.
  4. Post dimensions and quantities.
  5. Fixing clamps and accessories.
  6. Gate dimensions and quantities.
  7. Total project quantity.
  8. Delivery destination and preferred port.
  9. Technical drawings or BOQ.

For large infrastructure projects, the buyer should also identify any customized panels or special installation sections.

This information helps prevent differences between the approved drawing and the products supplied.

06. 358 Mesh Fencing Supply from BDFENCE

BDFENCE supplies 358 Security Fence for overseas importers, fencing distributors, security contractors and engineering procurement teams.

Available configurations include different panel heights, wire specifications, surface treatments and compatible posts.

For South African buyers, we recommend sending the technical drawing or BOQ before confirming the final order.

Our team can review the requested panel dimensions and supporting components.

You can also explore our complete fencing product range for other industrial and commercial applications.

Request a 358 Mesh Fencing Quotation

Are you sourcing 358 mesh fencing for an industrial facility, infrastructure project or security perimeter in South Africa?

Send BDFENCE your required specifications, estimated quantity and destination details.

Request a 358 Fence Quotation

BDFENCE — Hebei Bendin Industrial Technology Co., Ltd.

Website: bd-fence.com

WhatsApp: +86 18703287372

Email: info@bd-fence.com


Frequently Asked Questions

1. What is the standard opening of 358 mesh fencing?

The commonly used opening is approximately 76.2 × 12.7 mm, with a traditional 8-gauge wire specification.

2. Can 358 mesh fencing be customized?

Yes. Panel heights, widths, surface treatments and supporting posts can be discussed according to project requirements.

3. Is galvanized 358 fencing suitable for South African projects?

It can be suitable for outdoor applications. The required coating specification should reflect the installation environment, especially in coastal locations.

4. Can BDFENCE supply 358 panels with posts and accessories?

Yes. Buyers can request coordinated panels, posts, fixing clamps, fasteners and other compatible components.

5. What information is needed for a bulk order?

Provide panel dimensions, mesh opening, wire diameter, finish, post requirements, quantities and delivery destination. A BOQ or technical drawing is also useful.

Scroll to Top